One forum poster has reported a time server () in his config file. If you enable the NTP Client (that's the default setting) but leave the Server IP/Name field blank, your router will synchronize anyway. Note: A time server is hard-coded into the DD-WRT firmware. Have the clocks just changed in your area but you find that DD-WRT is still an hour behind/ahead? Open a Telnet/SSH command prompt and run these three commands: How often does NTP synchronize? According to redhawk0, it is "checked at boot up.then after 120 seconds for a second time.that's it." Now:Ģ) Choose the appropriate Time Zone for your areaģ) Set Summer Time (DST) as appropriate (See Time Zone settings below)Ĥ) Enter the domain name or IP address of the time server you have selected (See Time Servers below) To configure the NTP client, log into the router and go to "Setup" > "Basic Setup" > "Time Settings". You can, however, set it to synchronize with a public time server using the NTP client and then forget about it. This setting alone is only to adjust the synchronized time from the server to match your local time.Īs Brainslayer states "If NTP is disabled the time starts at zero which is 1 January 1970".Īs mentioned, you cannot just manually set the time on your router and then forget about it. Don't be fooled by the time zone setting located at "Setup" > "Basic Setup" > "Time Settings". You cannot set your time manually, and must do it via NTP. And if it has synchronized but the time has not been adjusted for your time zone, you may see unexpected behavior. Certain features such as "Access Restrictions" and the "Traffic by Month" graph will not function if the router hasn't synchronized with a time server. Your router's current time is listed in the upper right hand corner of the Web GUI when you log in to your router. NTP Client (Network Time Protocol) is the software client that allows your router to synchronize with an available time server.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |